8/6 Sand gravel pump just done for client

By | 2017-09-27T10:49:44+00:00 August 17th, 2017|Categories: dewatering pump, dredge pump, sand pump|Tags: , |

8/6 Sand gravel pump S Series sand gravel pumps are designed for continuous handling of the most difficult higher abrasive slurry, containing solids too large to be pumped by a standard slurry pump. 8/6 S Sand Pump 1) Total Net Weight— 1120kg 2) Wet parts— Impeller (diameter: 378mm),Bowl, Back liner 3) Shaft seal— Packing seal, Expeller [...]

Hydraulic driven submersible sand suction dredging pump

By | 2017-09-27T10:49:44+00:00 August 16th, 2017|Categories: dredge pump, Slurry pump|Tags: , , , |

Hydraulic driven submersible sand suction dredging pump Hydraulic driven submersible sand suction dredging pump is another new produce we developed. It is mainly used as an excavator attachment taking place of grab bucket when there is too much water, mud and not suitable for digging. It is driven by the excavator hydraulic system or a separate [...]

High chrome dredge pump casing

By | 2017-09-27T10:49:45+00:00 July 25th, 2017|Categories: dredge pump|Tags: , |

High chrome dredge pump casing Our WN series dredging pumps are single-stage single suction cantilever horizontal centrifugal pumps with advantages of light weight, good wear-resistan, super dredging performance, perfectly suited for the dredge on the whole construction, high multiple economy benefits, etc.. It throughout meets requirements of the dredge to dredging pumps. High chrome dredge pump [...]

How to get Hardness HRC 60+ for slurry pump and dredge pump

By | 2017-09-27T10:49:45+00:00 June 15th, 2017|Categories: dredge pump, sand pump, Slurry pump|Tags: , , |

Hardness is a important factor of slurry pump and dredge pump wear parts life. Slurry pumps or dredge pumps are mostly used in condition with liquid contended solid, so if all other factors, like flow, head, speed are firmed, wear parts hardness will be the only one could decide the pump parts service life. There [...]

High chrome dredge pump liner in machining process

By | 2017-09-27T10:49:46+00:00 June 5th, 2017|Categories: dredge pump|Tags: |

High Chrome dredge pump liner in machining process High chrome is common material for wear parts used on dredge pumps, due to its good wear resistance performance and economic cost.  Here bellow video is one dredge pump liner in machining process. This liner is one Warman dredge pump reserve engineer product, hardness will up to HRC62. [...]

Dredge pump casing in heat treatment process

By | 2017-09-27T10:49:46+00:00 June 2nd, 2017|Categories: dewatering pump, dredge pump|Tags: , |

Dredge pump is widely used on dredge ship, which used to pump sand from river or sea. Here we got a request to do casting work for one dredge pump casing, bellow is the casing just out from heat treatment process. After the heat treatment process, we can do the casing hardness upto HRC62, Min HRC 58 Just [...]