6×4 H Heavy Duty Slurry Pump
Pump Type: Centrifugal slurry pump
Drvie Type: ZVz/CRz/CV/DC
Power: Motor / Diesel
Intake/Discharge: 2″ /1.5″
Max Capacity: 360 m3/h
Max Head: 56m
The pump can be used in many applications, such as Pipeline transport, High velocity hydraulic transport, Mineral processing, Coal prep, Cyclone feeds, Aggregate processing, Fine primary mill grinding, Chemical slurry service, Tailings, secondary grinding, Industrial processing, Pulp and paper, Food processing, Cracking operations, Ash handling.
|H series slurry pump model list|
|The above performance is based on clean water test|
H series Slurry Pump Structure
Slurry Pump Wetted Parts
Liners – Hard metal liners are completely interchangeable with pressure molded elastomer. Elastomer seal rings back all liner joints. Easily replaceable liners are bolted, not glued, to the casing for positive attachment and east of maintenance.
Impeller – Hard metal and molded elastomer impellers are completely interchangeable. Front and rear shrouds have pump out vanes that reduce recirculation and seal contamination.
Throat bush – Hard metal and molded elastomer impellers are completely interchangeable. Wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal.
018：Cover Plate Liner
036: Frame Plate Liner
041: Frame Plate Liner Insert
060: Intake Joint
122: Stuffing Box Seal
124: Volute Cover Seal
132: Discharge Joint
H series Slurry Pump Shaft Seal
Most popular type of seal. Clean water at a certain pressure being injected into the packing through the lantern restrictor, preventing leakage from casing.
The expeller generate a reverse centrifugal force to prevent the leakage. Suitable for most slurry pumping applications providing a major advantage where no gland water is required.
Mechanical seal is used for applications where no extra substance is allowed to mix with the fluid being pumped, such as chemical or food industry.