Selection of materials to be used for slurry pump applications is not a precise procedure. Bellow we will talk how to select the suitable slurry pump material. The procedure must first account for all the factors (variable characteristics) of the particular slurry. The procedure must take into account the constraints imposed by the following: a)type of pump b)pump [...]
The slurry pump head is stands for the effective energy gained of the liquid from pump inlet to outlet, so the effective power for the liquid gained is head multiplied by mass flow and acceleration of gravity – the slurry pump effective power : Pe = ρgQH (W) = γQH (W) ρ – density of the liquid pumped [...]
1 If already known the slurry production process minimum, normal, maximum flow, maximum flow should be selected. […]
When the water pump suck water from the water pond, since inverted suction type in used, it can make the suction tube filled with water, after pump starts, eliminating the need for irrigation exhaust can be quickly into operation to improve the automation of pump start and reliable level. […]
1. Before to use submersible slurry pump, the motor cavity must be filled with water, running without water is strictly prohibited. […]
If you find that your present centrifugal pump is not satisfying your application and running as trouble free as you’d like, and you’ve checked: […]
1. Prohibit anhydrous Run, do not adjust suction to reduce the pump capacity, lower flow working is forbidden […]
IMPELLER REMOVAL As the wear life of LIBRA wet end parts continues improving, the corresponding maintenance interval increases. Longer life and harsh duty conditions can result in the impeller to lock tighter on the shaft over time and make routine removal difficult. […]
Slurry pumps can transport medium with solids and gravel without blockage. So slurry pumps are used in most harsh conditions. Because of the medium, slurry pumps damage is heavily, we must know something of daily maintenance. First, check working performance […]
1, Air in inlet pipe and the pump body: (1) Not filled enough water before starting of the slurry pumps, sometimes water overflow from the air vent mostly, but without rotation of shaft to have air completely discharged, there will be a little air remains in the inlet pipe or slurry pump. […]
