Slurry pump rubber throat bush

Rubber slurry pump throat bush is used to deal with the corrosive slurry with blunt particles. They are made of natural rubber, synthetic rubber, EPDM Rubber, Nitrile Rubber, Fluoroelastomer or any other as you required.
We proudly manufacture quality rubber slurry pump impellers and other replacement parts for some famous pump manufactures, which are 100% REVERSE INTERCHANGEABLE, no need to change your stock.

Partial list of throat bush available for the contemporary and legacy OEM styles
Slurry pump impellers style
1.5 /1 2 /1.5 3 /2 4 /3
6 /4 8 / 6 10 / 8 12 / 10
14 / 12 16 / 14 18 / 16 20 / 18

1. R08 is a black natural rubber, of low to medium hardness. R08 is used for impellers where superior erosive resistance is required in fine particle slurry. The hardness of R08 makes it more resistant to both chunking wear and dilation (i.e.: expansion caused by centrifugal forces) as compared to R26. R08 is generally only used for impellers

2. R26 is a black, soft natural rubber. It has superior erosion resistance to all other materials in fine particle slurry applications. The antioxidants and antidegradents used in R26 have been optimized to improve storage life and reduce degradation during use. The high erosion resistance of R26 is provided by the combination of its high resilience, high tensile strength and low Shore hardness.

3. Elastomer S12 is a synthetic rubber which is generally used in applications involving fats, oils and waxes. S12 has moderate erosion resistance.